Accesories

3 Way Actuated Valve 50mm PVC
L ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!

From €329.50*
3 Way Actuated Valve 63mm PVC
L ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!

From €439.50*
Actuated valve 50mm PVC (open/close)
ball valve (open/close)Multi-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!

From €299.50*
Actuated valve 63mm PVC (open/close)
ball valve (open/close)Multi-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!

From €309.50*
Adapter: Corrugated hose 32 / PVC-U 50
Corrugated hose adapter nozzle 32 (and 38) to PVC-U 50

€1.79*
Adapter: Corrugated hose 38 / PVC-U 50
Corrugated hose adapter nozzle 38 to PVC-U 50

€1.49*
Adapter: Corrugated hose 40 / PVC-U 40
Corrugated hose adapter nozzle 40 to PVC-U 40

€1.49*
Check valve 50mm PVC-U
Opens when the flow flows in the direction of the arrow, closes in the opposite direction. Installation recommended in the cold water supply line to the solar surface. Please select diameter and interface material.

€24.98*
Clamp for corrugated hose 38mm
Corrosion-protected quality, with hexagon socket and slot and cross

€1.98*
Connection set (pair) for the corrugated hose - please select diameter ...
Multi-part connection set to connect a RIPPultimate ® or SOLAR-RIPP ® solar surface to a pipeline made of corrugated hose. The individual parts are not yet glued together. Please select your desired diameter (corrugated hose dimension). The diameter refers to the inside diameter of the smooth corrugated hose sections.

Variants from €14.98*
€19.98*
Connection set PVC 50 (pair)
End 1: Outer diameter 50mm PVC adhesive socket. Inner diameter 40mm PVC adhesive sleeve (on pipe) for gluing to PVC-U fittings or pipes.End 2: Hose connection for flexible 50mm connection sleeve with two clamps (on SOLAR-RIPP ® distributor/collector or RIPPultimate solar absorber).

€7.98*
Connection sleeve 50mm
Flexible connection coupling to connect an original SOLAR-RIPP ® solar absorber to a 50mm pipe system. The rubberized transition sleeve has an inner diameter of 50mm and has two corrosion-resistant metal hose clamps. This component can also be used to connect original SOLAR-RIPP ® distributors and collectors with an outer diameter of 50mm.

From €7.99*
Corrugated hose, 38mm, 25.5m length
Easy-to-install, flexible corrugated hose made of heat-resistant, high-quality polypropylene (PP) with high UV resistance, can be cut every 1.5m, outer diameter approx. 45mm, inner diameter at the smooth connecting sleeves min. 38mm, black, 25.5m roll.

€89.98*
PE-HD 50mm pipe bend 90°
Best professional quality, ductile - therefore almost indestructible, frost-proof, black, extra UV-resistant PE-HD material, polyethylene, polyethylene, 50mm outside diameter, weldable (gluing is NOT possible), 3mm wall thickness, illustration as an example.

€5.93*
Pipe - please select...

From €1.98*
New
Pipe clamp 50 black
Very stable pipe fastening (16mm thick) for screwing 50mm pipes made of e.g. PE-HD or PVC-U to walls, ceilings, masonry, wooden posts etc. (gluing not possible), black, stable plastic suitable for outdoor use with centrally arranged hole for 6mm screws (can be drilled out if necessary), 25mm distance (space between pipe and mounting level), base area (screw-on contact surface) 16mm x 49mm, at the widest point the clamp is 59mm wide on the outside, almost indestructible, recommended installation distance for PE pipe 75cm (at pressure level SDR11). Two-part with removable clip bracket. NOT suitable for original SOLAR-RIPP ® distributors and collectors (clamp is too wide), please use our narrower metal clamps for this!

€2.37*
New
PVC 90° angle 50mm black
PVC-U 90-degree angle with double-sided adhesive sleeve 50mm inner diameter, black

€4.49*
New
PVC sleeve 50mm black
PVC-U sleeve with double-sided adhesive sleeve 50mm inner diameter, black

€2.98*
New
PVC transition sleeve 50mm to 1-1/2" British imperial
PVC-U sleeve with double-sided adhesive sleeve. One side 50mm inner diameter, the other side has 1-1/2" (1.5"), 48.3mm, BI (British Imperial) inner diameter, grey

€4.98*
SOLAR-RIPP ® Filling Fitting/Air Vent/Drainer- Choose Variant ...
Installed horizontally for drainage, installed vertically for ventilation. Ideal for connecting a garden hose to fill the SOLAR-RIPP ® system during commissioning. Gluing not possible! Variant for butt welding or heating element welding as well as a mixed variant available.

Variants from €27.98*
€29.98*
Tip
New
Temperature sensor installation adapter PVC-U
50mm installation adapter made of PVC-U for mounting a SOLAR-RIPP ® temperature sensor with 6mm diameter as a cold water sensor for measuring the pool water sucked in by the swimming pool pump, corrosion-free, the use of the optionally available thermal paste to increase contact is recommended, simply glue into a T-fitting with 50mm PVC-U inner diameter.

€17.83*
New
Temperature sensor installation adapter PVC-U (1-1/2", BI, British imperial, 1.5")
1-1/2" (48.3mm) installation adapter made of PVC-U for mounting a SOLAR-RIPP ® temperature sensor with 6mm diameter as a cold water sensor for measuring the pool water sucked in by the swimming pool pump, corrosion-free, the use of the optionally available thermal paste to increase contact is recommended, simply glue into a T-fitting with a British imperial 1-1/2" (48.3mm) PVC-U inner diameter.

€23.78*
Loading...
Upload in progress, please be patient ...