L ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
T ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
L ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
T ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
ball valve (open/close)Multi-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
ball valve (open/close)Multi-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
Protective contact power cable according to DIN49441, 250VAC, 16A, 1.5mm2, black, 5m long with attached Schuko angle plug, we recommend ordering 2 pieces at once, one cable for connecting the socket to the solar controller, the second cable for connecting the solar controller to the pump or motor valve (the plug is then not required and can be cut off).
SOLAR-RIPP lightning protection element suitable for the old control units SRC40/ SRC181/ SRC182/ SRC192 and TSG39 /TSG60/ TSG70/ TSG160/ TSG180/ TSG190/ TSG252. Please mount at the cable end of the solar sensor, as close as possible to the sensor itself!
PE-HD connection set for incorporating the cold water sensor installation adapter made of PVC-U into a 50mm HD-PE pipe, please install in front of the pump (suction side) in order to measure the pool water temperature as accurately as possible, black/grey, illustration for example.
Temperature sensor for the SOLAR-RIPP ® SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP solar controller; Universal temperature sensor of the latest series with an outer diameter of 6.5mm; equally usable as a solar sensor and pool water sensor; as a solar sensor, simply attach it outside, facing the sun, to the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element during installation; insert as a pool water sensor into the cold water sensor installation adapter PVC50 using thermal paste; Price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from a length of 5m correspond to IP67, have a watertight cast sleeve made of VA and are provided with a red silicone line and are therefore temperature-resistant between -50° and +200°C. Please select the necessary sensor length!
Temperature sensor for the old control units SRC40/ SRC181/ SRC182/ SRC192 and TSG39 /TSG60/ TSG70/ TSG160/ TSG180/ TSG190/ TSG252. Please select the required sensor length!
50mm installation adapter made of PVC-U for mounting a SOLAR-RIPP ® temperature sensor with 6mm diameter as a cold water sensor for measuring the pool water sucked in by the swimming pool pump, corrosion-free, the use of the optionally available thermal paste to increase contact is recommended, simply glue into a T-fitting with 50mm PVC-U inner diameter.
1-1/2" (48.3mm) installation adapter made of PVC-U for mounting a SOLAR-RIPP ® temperature sensor with 6mm diameter as a cold water sensor for measuring the pool water sucked in by the swimming pool pump, corrosion-free, the use of the optionally available thermal paste to increase contact is recommended, simply glue into a T-fitting with a British imperial 1-1/2" (48.3mm) PVC-U inner diameter.
