SOLAR-RIPP Electric
SOLAR-RIPP ® solar controller SRCPOOLML000
Product Type:
electrical component control/regulator
|
Solar controller variant:
SRCPOOLML000
Product number:
SRCPOOLML000
EAN:
4065407469801
Manufacturer:
SOLAR-RIPP Electric
Product information "SOLAR-RIPP ® solar controller SRCPOOLML000"
see PDF data sheet, only the device, without sensor accessory package!
| Product Type: | electrical component control/regulator |
|---|---|
| connection type: | electric, using additional screws |
| colour: | multicolored |
| material: | Item made from multiple materials |
| uv resistance: | low |
| guarantee: | Legal |
SOLAR-RIPP Electric
Solar controller accessories
Temperature sensor
€14.98*
Temperature sensor for the SOLAR-RIPP ® SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP solar controller; Universal temperature sensor of the latest series with an outer diameter of 6.5mm; equally usable as a solar sensor and pool water sensor; as a solar sensor, simply attach it outside, facing the sun, to the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element during installation; insert as a pool water sensor into the cold water sensor installation adapter PVC50 using thermal paste; Price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from a length of 5m correspond to IP67, have a watertight cast sleeve made of VA and are provided with a red silicone line and are therefore temperature-resistant between -50° and +200°C. Please select the necessary sensor length!
Temperature sensor
€25.98*
Temperature sensor for the SOLAR-RIPP ® SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP solar controller; Universal temperature sensor of the latest series with an outer diameter of 6.5mm; equally usable as a solar sensor and pool water sensor; as a solar sensor, simply attach it outside, facing the sun, to the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element during installation; insert as a pool water sensor into the cold water sensor installation adapter PVC50 using thermal paste; Price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from a length of 5m correspond to IP67, have a watertight cast sleeve made of VA and are provided with a red silicone line and are therefore temperature-resistant between -50° and +200°C. Please select the necessary sensor length!
Variants from €14.98*
Temperature sensor
€39.98*
Temperature sensor for the SOLAR-RIPP ® SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP solar controller; Universal temperature sensor of the latest series with an outer diameter of 6.5mm; equally usable as a solar sensor and pool water sensor; as a solar sensor, simply attach it outside, facing the sun, to the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element during installation; insert as a pool water sensor into the cold water sensor installation adapter PVC50 using thermal paste; Price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from a length of 5m correspond to IP67, have a watertight cast sleeve made of VA and are provided with a red silicone line and are therefore temperature-resistant between -50° and +200°C. Please select the necessary sensor length!
Variants from €14.98*
Temperature sensor
€49.98*
Temperature sensor for the SOLAR-RIPP ® SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP solar controller; Universal temperature sensor of the latest series with an outer diameter of 6.5mm; equally usable as a solar sensor and pool water sensor; as a solar sensor, simply attach it outside, facing the sun, to the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element during installation; insert as a pool water sensor into the cold water sensor installation adapter PVC50 using thermal paste; Price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from a length of 5m correspond to IP67, have a watertight cast sleeve made of VA and are provided with a red silicone line and are therefore temperature-resistant between -50° and +200°C. Please select the necessary sensor length!
Variants from €14.98*
Temperature sensor
€59.98*
Temperature sensor for the SOLAR-RIPP ® SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP solar controller; Universal temperature sensor of the latest series with an outer diameter of 6.5mm; equally usable as a solar sensor and pool water sensor; as a solar sensor, simply attach it outside, facing the sun, to the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element during installation; insert as a pool water sensor into the cold water sensor installation adapter PVC50 using thermal paste; Price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from a length of 5m correspond to IP67, have a watertight cast sleeve made of VA and are provided with a red silicone line and are therefore temperature-resistant between -50° and +200°C. Please select the necessary sensor length!
Variants from €14.98*
Temperature sensor
€79.98*
Temperature sensor for the SOLAR-RIPP ® SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP solar controller; Universal temperature sensor of the latest series with an outer diameter of 6.5mm; equally usable as a solar sensor and pool water sensor; as a solar sensor, simply attach it outside, facing the sun, to the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element during installation; insert as a pool water sensor into the cold water sensor installation adapter PVC50 using thermal paste; Price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from a length of 5m correspond to IP67, have a watertight cast sleeve made of VA and are provided with a red silicone line and are therefore temperature-resistant between -50° and +200°C. Please select the necessary sensor length!
Variants from €14.98*
Actuated valve 50mm PVC (open/close)
€299.50*
ball valve (open/close)Multi-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
Actuated valve 63mm PVC (open/close)
€309.50*
ball valve (open/close)Multi-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
3 Way Actuated Valve 50mm PVC
€329.50*
L ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
3 Way Actuated Valve 63mm PVC
€439.50*
L ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
Spare fuse (for SRCPOOLML...)
€1.98*
suitable for the four device variants SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR, SRCPOOLMLFPP
Pump SRP01 (~230VAC)
€179.99*
CE mark, extremely quiet running, small and powerful, low power consumption, long running times thanks to high-quality materials and components, open impeller, insensitive to contamination, powder-coated motor against corrosion, suitable for automatic switching on/off using the SOLAR-RIPP ®, solar controller ( optional), normal suction, connection piece for our flexible corrugated hose (clamps required, grommet connection), power consumption P1 390 watts, power output P2 200 watts, maximum throughput 8m3/h, maximum delivery height 8.5m, speed approx. 2,840 /min, installation dimensions 365mm x 140mm x 190mm (L x W x H), 1~230 volts, 50 Hz., nominal current 1.95 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 4.7kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!
Pump SRP03 (~230VAC)
€199.99*
CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 450 watts, power output P2 250 watts, maximum throughput 11.5m3/h, maximum delivery height 10.7m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H), 1~230 volts, 50 Hz., nominal current 2.3 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 6.6kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/ F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l)Please inquire about other pumps!
Variants from €179.99*
Pump SRP05 (~230VAC)
€229.99*
CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 450 watts, power output P2 250 watts, maximum throughput 11.5m3/h, maximum delivery height 10.7m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H), 1~230 volts, 50 Hz., nominal current 2.3 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 6.6kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/ F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!
Variants from €179.99*
Pump SRP07 (~230VAC)
€239.99*
CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 600 watts, power output P2 400 watts, maximum throughput 12m3/h, maximum delivery height 12m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H ), 1~230 volts, 50 Hz., rated current 2.7 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, Protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 7.5kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!
Variants from €179.99*
Pump SRP10 (~230VAC)
€249.99*
CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 690 watts, power output P2 450 watts, maximum throughput 17m3/h, maximum delivery height 13m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H ), 1~230 volts, 50 Hz., rated current 3.2 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, Protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 7.6kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!
Variants from €179.99*
Pump SRP20 (~230VAC)
€399.99*
CE mark, large flow rate, low motor power, service-friendly design, low-wear materials, extremely large fiber catcher, pre-filter cover can be opened without tools, self-priming up to 0.5m, long service life, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller ( optional) when using a relay (contactor), suction connection 63mm PVC adhesive sleeve, pressure connection 50mm PVC adhesive sleeve (adhesive sleeves as replaceable inserts by screwing), electrical separation between swimming pool water and motor, power consumption P1 1,200 watts, power output P2 800 watts, maximum throughput 28m3 /h, maximum delivery height 14.2m, speed approx. 2,840 /min, dimensions 565mm x 160mm x 280mm (L x W x H), 1~230 volts, 50 Hz., nominal current 5.3 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 12kg, Customs tariff number: 84137051, illustration only as an example, additional pumps for larger systems on request, operating instructions D/GB/F, do not connect directly to the solar controller, but connect a relay (available as an option)! Electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!
Variants from €179.99*