We manufacture and deliver your thermal solar surface in the desired configuration. For transport reasons, delivery is made in individual parts that are listed in the detailed shopping cart and must be assembled on site (please cut the solar hose yourself to the desired length).
Original SOLAR-RIPP ® seal suitable for solar pipes, solar hoses, ribbed hoses, corrugated hoses with an outer diameter of 25 mm, backwards compatible with older systems.
Flexible connection coupling to connect an original SOLAR-RIPP ® solar absorber to a 50mm pipe system. The rubberized transition sleeve has an inner diameter of 50mm and has two corrosion-resistant metal hose clamps. This component can also be used to connect original SOLAR-RIPP ® distributors and collectors with an outer diameter of 50mm.
Original SOLAR-RIPP ® solar tube, solar hose, ribbed tube, ribbed hose, corrugated tube, corrugated hose. The fin design increases the surface area by a factor of 3 and promotes turbulent flow for better heat transfer. The hose is supplied wound on a roll in the form of a ring. Please inquire about larger order quantities separately. Various tube lengths available.
We have been manufacturing for 30 years! Original SOLAR-RIPP ® distribution and collecting pipes are delivered in one piece and are frost-resistant. Laborious, time-consuming and always error-prone bonding, as with competing products, is not available with SOLAR-RIPP ® in professional quality! Decades of use in 45 countries in different climate zones around the world without any significant complaints have led us to offer a functional guarantee of 10 years.
Small hand tap or small manual valve for filling, venting and draining or for connecting a pressure gauge, manual operation on/off, with 3/4" external pipe thread on both sides, length approx. 5cm, delivery including black screw cap.
Small hand tap or small manual valve for filling, venting and draining or for connecting a pressure gauge, manual operation on/off, with 3/4" external pipe thread on both sides, length approx. 5cm.
End 1: Outer diameter 50mm PVC adhesive socket. Inner diameter 40mm PVC adhesive sleeve (on pipe) for gluing to PVC-U fittings or pipes.End 2: Hose connection for flexible 50mm connection sleeve with two clamps (on SOLAR-RIPP ® distributor/collector or RIPPultimate solar absorber).
Perfect fixation of the original SOLAR-RIPP ® distributor/collector with an outer diameter of 50mmBore diameter 7.5mmMade from stainless V2A steel (1.4301), 1mm thick, pre-bentDelivery without fastening material10 year functional guarantee
Perfect fixation of the original SOLAR-RIPP ® distributors/collectors of all diameters565mm long, 15mm wide, 1mm thickBore diameter 8mmCan be divided/shortened (e.g. with tin snips)
i.e. one strip can be made into twoCan be extended as required using screwsMade from stainless V2A steel (1.4301)Delivery without fastening material10 year functional guarantee
Connection variant:
Connection sleeve required on both sides
Installed horizontally for drainage, installed vertically for ventilation. Ideal for connecting a garden hose to fill the SOLAR-RIPP ® system during commissioning. Gluing not possible! Variant for butt welding or heating element welding as well as a mixed variant available.
Practical tool for cutting the SOLAR-RIPP ® solar pipes or solar hoses to length with millimeter precision. Professionals use this tool instead of a cutter to easily make square cuts while standing. Without a ratchet mechanism that can break! Illustration only exemplary.
ball valve (open/close)Multi-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
ball valve (open/close)Multi-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
L ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
L ballMulti-Voltage ModelVoltage 24-240 VAC / VDC (-0/+5%) 50 / 60HzTwo auxiliary limit switchesManual overrideVisual position indicatorIndicator lights for operating statusWorking temperature: -20°C at + 60°CDegree of protection IEC 60529: IP-67Internal heater to prevent damage from condensation 3.5WHousing in polyamide (humidity max. 75%)Fastening and main shaft made of stainless steelRunning time /90°: 50mm 9s, 63mm 13sOperating time without load (s/90°) +-10%Power consumption at maximum torque: 24VAC/VDC 1.3A 30.7W; 240VAC/VDC 0.2A 46WInstallation and operating instructions are available electronically for downloadNote when using our solar controller: If the motor valve and additional pump are operated in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!The housing color may vary!
Temperature sensor for the SOLAR-RIPP ® SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP solar controller; Universal temperature sensor of the latest series with an outer diameter of 6.5mm; equally usable as a solar sensor and pool water sensor; as a solar sensor, simply attach it outside, facing the sun, to the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element during installation; insert as a pool water sensor into the cold water sensor installation adapter PVC50 using thermal paste; Price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from a length of 5m correspond to IP67, have a watertight cast sleeve made of VA and are provided with a red silicone line and are therefore temperature-resistant between -50° and +200°C. Please select the necessary sensor length!
