RIPPultimate - solar absorber

15-fold (for 15 parallel solar tubes, solar hoses); 525mm wide; middle clip (clip 7) with locking lug

Consistent, flexible clip strip, in your desired width.

Slightly flexible connection sleeve with 50mm inner diameter. Made from material pressure-resistant up to 3 bar including two corrosion-protected metal clamps. High chemical resistance! 80mm long. Other lengths available on request!

Slightly flexible connection sleeve with 50mm inner diameter. Made from material pressure-resistant up to 3 bar including two corrosion-protected metal clamps. High chemical resistance! 150mm long. Other lengths available on request!

Flexible connection coupling to connect an original SOLAR-RIPP ® solar absorber to a 50mm pipe system. The rubberized transition sleeve has an inner diameter of 50mm and has two corrosion-resistant metal hose clamps. This component can also be used to connect original SOLAR-RIPP ® distributors and collectors with an outer diameter of 50mm.

Original SOLAR-RIPP ® seal suitable for solar pipes, solar hoses, ribbed hoses, corrugated hoses with an outer diameter of 25 mm, backwards compatible with older systems.

Original SOLAR-RIPP ® solar tube, solar hose, ribbed tube, ribbed hose, corrugated tube, corrugated hose. The fin design increases the surface area by a factor of 3 and promotes turbulent flow for better heat transfer. The hose is supplied wound on a roll in the form of a ring. Please inquire about larger order quantities separately. Various tube lengths available.

We have been manufacturing for 30 years! Original SOLAR-RIPP ® distribution and collecting pipes are delivered in one piece and are frost-resistant. Laborious, time-consuming and always error-prone bonding, as with competing products, is not available with SOLAR-RIPP ® in professional quality! Decades of use in 46 countries in different climate zones around the world without any significant complaints have led us to offer a functional guarantee of 10 years.

We have been manufacturing for 30 years! Original SOLAR-RIPP ® distribution and collecting pipes are delivered in one piece and are frost-resistant. Laborious, time-consuming and always error-prone bonding, as with competing products, is not available with SOLAR-RIPP ® in professional quality! Decades of use in 45 countries in different climate zones around the world without any significant complaints have led us to offer a functional guarantee of 10 years.

Please send us further information, such as diameter, connections, type of outlets, etc., separately via email!

End 1: Outer diameter 50mm PVC adhesive socket. Inner diameter 40mm PVC adhesive sleeve (on pipe) for gluing to PVC-U fittings or pipes.End 2: Hose connection for flexible 50mm connection sleeve with two clamps (on SOLAR-RIPP ® distributor/collector or RIPPultimate solar absorber).

Multi-part connection set to connect a RIPPultimate ® or SOLAR-RIPP ® solar surface to a pipeline made of corrugated hose. The individual parts are not yet glued together. Please select your desired diameter (corrugated hose dimension). The diameter refers to the inside diameter of the smooth corrugated hose sections.

Small hand tap or small manual valve for filling, venting and draining or for connecting a pressure gauge, manual operation on/off, with 3/4" external pipe thread on both sides, length approx. 5cm, delivery including black screw cap.

Perfect fixation of the original SOLAR-RIPP ® distributor/collector with an outer diameter of 50mmBore diameter 7.5mmMade from stainless V2A steel (1.4301), 1mm thick, pre-bentDelivery without fastening material10 year functional guarantee

Perfect fixation of the original SOLAR-RIPP ® distributors/collectors of all diameters565mm long, 15mm wide, 1mm thickBore diameter 8mmCan be divided/shortened (e.g. with tin snips) i.e. one strip can be made into twoCan be extended as required using screwsMade from stainless V2A steel (1.4301)Delivery without fastening material10 year functional guarantee

Installed horizontally for drainage, installed vertically for ventilation. Ideal for connecting a garden hose to fill the SOLAR-RIPP ® system during commissioning. Gluing not possible! Variant for butt welding or heating element welding as well as a mixed variant available.

This component allows the RIPPultimate ® or SOLAR-RIPP ® solar surface to be left out.This is necessary for antennas, masts, ventilation, ventilators, chimneys, superstructures, photovoltaic supports, skylights or other obstacles in the plane of the solar surface.Please choose the size in both axes.Delivery including the necessary number of SOLAR-RIPP ® solar pipe seals SRX.For larger dimensions, the delivery may be made in several parts including connecting elements.

Free expert service as any necessary help when putting together the solar absorber. The offer is transmitted via email.

DIN A4 sized material sample for demonstration purposes. Experience the original RIPPultimate solar absorber live in your hands