SOLAR-RIPP ® solar controller SRCPOOLMLFPR

Temperature sensor for the new SOLAR-RIPP ® WiFi solar controller SRSCWIFI2025 and the models SRCPOOLMINI, SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP; universal temperature sensor of the latest series with 6.5mm outer diameter; can be used equally as a solar sensor and pool water sensor; as a solar sensor, simply attach it to the outside, facing the sun, on the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element when installing; as a pool water sensor, insert it into the cold water sensor installation adapter PVC50 using thermal paste; price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from 5m in length comply with IP67, have a waterproof cast sleeve made of stainless steel and are provided with a red silicone cable and are therefore temperature resistant between -50° and +200°C. Please select the required sensor length!

5g

IP54, lightning protection, compatible with the devices SRCPOOLML... (not necessary for the WiFi device)

Optional inserts for PE-HD for welding available as accessories! This article is available as standard with DN40/d50 and DN50/d63 in a two-way and three-way version. The three-way version is available in three (3) different hydraulic connection variants. Other dimensions (diameters) are also available on request.

Optional inserts for PE-HD for welding available as accessories! This article is available as standard with DN40/d50 and DN50/d63 in a two-way and three-way version. The three-way version is available in three (3) different hydraulic connection variants. Other dimensions (diameters) are also available on request.

Optional inserts for PE-HD for welding available as accessories! This article is available as standard with DN40/d50 and DN50/d63 in a two-way and three-way version. The three-way version is available in three (3) different hydraulic connection variants. Other dimensions (diameters) are also available on request.

Optional inserts for PE-HD for welding available as accessories! This article is available as standard with DN40/d50 and DN50/d63 in a two-way and three-way version. The three-way version is available in three (3) different hydraulic connection variants. Other dimensions (diameters) are also available on request.

suitable for the four device variants SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR, SRCPOOLMLFPP

CE mark, extremely quiet running, small and powerful, low power consumption, long running times thanks to high-quality materials and components, open impeller, insensitive to contamination, powder-coated motor against corrosion, suitable for automatic switching on/off using the SOLAR-RIPP ®, solar controller ( optional), normal suction, connection piece for our flexible corrugated hose (clamps required, grommet connection), power consumption P1 390 watts, power output P2 200 watts, maximum throughput 8m3/h, maximum delivery height 8.5m, speed approx. 2,840 /min, installation dimensions 365mm x 140mm x 190mm (L x W x H), 1~230 volts, 50 Hz., nominal current 1.95 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 4.7kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!

CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 450 watts, power output P2 250 watts, maximum throughput 11.5m3/h, maximum delivery height 10.7m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H), 1~230 volts, 50 Hz., nominal current 2.3 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 6.6kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/ F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l)Please inquire about other pumps!

CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 450 watts, power output P2 250 watts, maximum throughput 11.5m3/h, maximum delivery height 10.7m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H), 1~230 volts, 50 Hz., nominal current 2.3 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 6.6kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/ F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!

CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 600 watts, power output P2 400 watts, maximum throughput 12m3/h, maximum delivery height 12m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H ), 1~230 volts, 50 Hz., rated current 2.7 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, Protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 7.5kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!

CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 690 watts, power output P2 450 watts, maximum throughput 17m3/h, maximum delivery height 13m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H ), 1~230 volts, 50 Hz., rated current 3.2 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, Protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 7.6kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!

CE mark, large flow rate, low motor power, service-friendly design, low-wear materials, extremely large fiber catcher, pre-filter cover can be opened without tools, self-priming up to 0.5m, long service life, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller ( optional) when using a relay (contactor), suction connection 63mm PVC adhesive sleeve, pressure connection 50mm PVC adhesive sleeve (adhesive sleeves as replaceable inserts by screwing), electrical separation between swimming pool water and motor, power consumption P1 1,200 watts, power output P2 800 watts, maximum throughput 28m3 /h, maximum delivery height 14.2m, speed approx. 2,840 /min, dimensions 565mm x 160mm x 280mm (L x W x H), 1~230 volts, 50 Hz., nominal current 5.3 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 12kg, Customs tariff number: 84137051, illustration only as an example, additional pumps for larger systems on request, operating instructions D/GB/F, do not connect directly to the solar controller, but connect a relay (available as an option)! Electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!

Protective contact power cable according to DIN49441, 250VAC, 16A, 1.5mm2, black, 5m long with attached Schuko angle plug, we recommend ordering 2 pieces at once, one cable for connecting the socket to the solar controller, the second cable for connecting the solar controller to the pump or motor valve (the plug is then not required and can be cut off).

Relay - in protective housing - is to be used wherever potential-free switching is required instead of the 230VAC output of the controller or where the switching capacity of the controller (solar controller) is not sufficient.