Used handheld welding mirror (heating element for butt welding)
€236.81
Currently not available
Product information "Used handheld welding mirror (heating element for butt welding)"
USED UNIT: Finally put an end to unreliable, environmentally harmful PVC adhesive joints that become more brittle over time and professionally weld PE pipes (polyethylene), PP pipes (polypropylene) and PROPYSOL (SOLAR-RIPP ®, special solar material). This joining technique involves joining similar materials in a liquid (pasty) state. As this creates a homogeneous material at the joint, but the wall thickness increases during welding, the weld seam is more stable than the pipe itself! 180mm heating plate diameter, ready to plug in with cable for 230 volt connection, illustration for example.
| Heating plate diameter: | 180mm |
|---|---|
| Pipeline series: | Series PE-HD 50, Series PE-HD 63 |
| Product Type: | tool |
| used (not new): | yes |
| connection type: | electric |
| colour: | multicolored |
| material: | Item made from multiple materials |
Pipeline parts
Finally put an end to unreliable, environmentally harmful PVC adhesive joints that become more brittle over time and professionally weld PE pipes (polyethylene), PP pipes (polypropylene) and PROPYSOL (SOLAR-RIPP ®, special solar material). This joining technique involves joining similar materials in a liquid (pasty) state. As this creates a homogeneous material at the joint, but the wall thickness increases during welding, the weld seam is more stable than the pipe itself! 180mm heating plate diameter, ready to plug in with cable for 230 volt connection, illustration for example.
PE-HD connection set for incorporating the cold water sensor installation adapter made of PVC-U into a 50mm HD-PE pipe, please install in front of the pump (suction side) in order to measure the pool water temperature as accurately as possible, black/grey, illustration for example.
Best professional quality, ductile - therefore almost indestructible, frost-proof, black, extra UV-resistant PE-HD material, polyethylene, polyethylene, 50mm outside diameter, weldable (gluing is NOT possible), 3mm wall thickness, illustration as an example.
Best professional quality, ductile - therefore almost indestructible, frost-proof, black, extra UV-resistant PE-HD material, polyethylene, polyethylene, 50mm outside diameter, weldable (gluing is NOT possible), 3mm wall thickness, illustration as an example.
Best professional quality, ductile - therefore almost indestructible, frost-proof, black, extra UV-resistant PE-HD material, polyethylene, polyethylene, 50mm outside diameter, weldable (gluing is NOT possible), 3mm wall thickness, illustration as an example.
Very stable pipe fastening (16mm thick) for screwing 50mm pipes made of e.g. PE-HD or PVC-U to walls, ceilings, masonry, wooden posts etc. (gluing not possible), black, stable plastic suitable for outdoor use with centrally arranged hole for 6mm screws (can be drilled out if necessary), 25mm distance (space between pipe and mounting level), base area (screw-on contact surface) 16mm x 49mm, at the widest point the clamp is 59mm wide on the outside, almost indestructible, recommended installation distance for PE pipe 75cm (at pressure level SDR11). Two-part with removable clip bracket. NOT suitable for original SOLAR-RIPP ® distributors and collectors (clamp is too wide), please use our narrower metal clamps for this!
Installed horizontally for drainage, installed vertically for ventilation. Ideal for connecting a garden hose to fill the SOLAR-RIPP ® system during commissioning. Gluing not possible! Variant for butt welding or heating element welding as well as a mixed variant available.
Installed horizontally for drainage, installed vertically for ventilation. Ideal for connecting a garden hose to fill the SOLAR-RIPP ® system during commissioning. Gluing not possible! Variant for butt welding or heating element welding as well as a mixed variant available.