SOLAR-RIPP ® Solarcontroller ECO

50mm installation adapter made of PVC-U for mounting a SOLAR-RIPP ® temperature sensor with 6mm diameter as a cold water sensor for measuring the pool water sucked in by the swimming pool pump, corrosion-free, the use of the optionally available thermal paste to increase contact is recommended, simply glue into a T-fitting with 50mm PVC-U inner diameter.

5g

Relay - in protective housing - is to be used wherever potential-free switching is required instead of the 230VAC output of the controller or where the switching capacity of the controller (solar controller) is not sufficient.

CE mark, extremely quiet running, small and powerful, low power consumption, long running times thanks to high-quality materials and components, open impeller, insensitive to contamination, powder-coated motor against corrosion, suitable for automatic switching on/off using the SOLAR-RIPP ®, solar controller ( optional), normal suction, connection piece for our flexible corrugated hose (clamps required, grommet connection), power consumption P1 390 watts, power output P2 200 watts, maximum throughput 8m3/h, maximum delivery height 8.5m, speed approx. 2,840 /min, installation dimensions 365mm x 140mm x 190mm (L x W x H), 1~230 volts, 50 Hz., nominal current 1.95 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 4.7kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!

CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 450 watts, power output P2 250 watts, maximum throughput 11.5m3/h, maximum delivery height 10.7m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H), 1~230 volts, 50 Hz., nominal current 2.3 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 6.6kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/ F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l)Please inquire about other pumps!

CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 450 watts, power output P2 250 watts, maximum throughput 11.5m3/h, maximum delivery height 10.7m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H), 1~230 volts, 50 Hz., nominal current 2.3 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 6.6kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/ F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!

CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 600 watts, power output P2 400 watts, maximum throughput 12m3/h, maximum delivery height 12m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H ), 1~230 volts, 50 Hz., rated current 2.7 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, Protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 7.5kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!

CE mark, quiet running, service-friendly, low-wear materials, fiber catcher, self-priming up to 2m, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller (optional), connections for corrugated hose (nozzle) and 50mm PVC pipe (adhesive sleeve as replaceable insert), electrical separation between swimming pool water and motor, power consumption P1 690 watts, power output P2 450 watts, maximum throughput 17m3/h, maximum delivery height 13m, speed approx. 2,840 rpm, installation dimensions 496mm x 200mm x 435mm (L x W x H ), 1~230 volts, 50 Hz., rated current 3.2 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, Protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 7.6kg, customs tariff number: 84137051, illustration only as an example, other pumps for larger systems on request, operating instructions D/GB/F, electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!

CE mark, large flow rate, low motor power, service-friendly design, low-wear materials, extremely large fiber catcher, pre-filter cover can be opened without tools, self-priming up to 0.5m, long service life, suitable for automatic switching on/off by the SOLAR-RIPP ®, solar controller ( optional) when using a relay (contactor), suction connection 63mm PVC adhesive sleeve, pressure connection 50mm PVC adhesive sleeve (adhesive sleeves as replaceable inserts by screwing), electrical separation between swimming pool water and motor, power consumption P1 1,200 watts, power output P2 800 watts, maximum throughput 28m3 /h, maximum delivery height 14.2m, speed approx. 2,840 /min, dimensions 565mm x 160mm x 280mm (L x W x H), 1~230 volts, 50 Hz., nominal current 5.3 A, for standard voltage according to IEC 38 and DIN EN 60034 (Euro voltage), suitable for continuous operation at 1~ 220-240 volts, continuous sound pressure level dB (A) <= 70, protection class IPX4, thermal class B, water temperature max. 60 degrees C, internal housing pressure max. 2.5 bar, 12kg, Customs tariff number: 84137051, illustration only as an example, additional pumps for larger systems on request, operating instructions D/GB/F, do not connect directly to the solar controller, but connect a relay (available as an option)! Electrical connection only by a specialist, permissible total salt concentration 0.5% (5g/l).Please inquire about other pumps!