SOLAR-RIPP ® Solar Controller WiFi-2026 - please select model ...
€699.99
delivery time: 4-9 days
Description
New in version 2026: with adjustable priority switching of the solar system over the heat pump and photovoltaic smart meter support.
| Special feature, Advantage, Benefit: | Finally, you can conveniently set up, operate, control, monitor and display your solar system remotely from your mobile phone, iPad or computer |
|---|---|
| Device version: | with internal antenna |
| Maximum temperature limit adjustable: | yes |
| Menu language: | DE, EN, ES, FR, IT, NL |
| Product Type: | electrical component control/regulator |
| Relay outputs 230VAC: | 1 |
| Relay outputs potential-free: | 2 |
| Sensor inputs: | max. 3 |
| Solar controller variant: | SRSCWIFI2026 |
| electrical protection class: | IP54 |
| Device type: | WiFi temperature difference control of thermal solar absorber systems with the functions "heating", "cooling", "flushing". Remote operation via the Internet using an Internet browser (costs may be incurred by the Internet provider) |
| connection type: | electric, wireless network (WiFi) |
| Necessary for device operation: | To fully use this device, a 230VAC power supply and access to a WLAN network (WiFi) with an internet-enabled device such as a mobile phone, notebook, iPad or computer is required (not included in delivery). |
| Support: | If you have any queries, you will receive prompt, written support via email, the response time is usually only a few hours |
| colour: | black, multicolored |
| material: | Item made from multiple materials |
| uv resistance: | medium |
| guarantee: | Legal |
| Device dimensions: | 120mm x 120mm x 60mm (without antenna, cable ducts, etc.) |
| Hardware: | 230VAC power cable (approx. 1.2m) with attached EU plug, Priority switching solar over heat pump, Photovoltaic smart meter support, 6-pin terminal for controlling a speed-controlled circulation pump with three or four speeds (GND, STOP, N1, N2, N3, N4), 1 pc. 16A load relay 230V for direct connection of a circulation pump (PE, N, L), 2 pieces of potential-free relays for free use for e.g. motor ball valve, heat pump, weekly timer, dosing release, etc., 3 connection terminals for internal installation (PE, L, N), 3 connection terminals for up to three temperature sensors (solar temperature, pool water temperature, return temperature). At least two sensors are required, 4 connection terminals for external switches (digital inputs with freely selectable function assignments), DMX-Out interface for controlling RGB /RGBW spotlights (DATA+, DATA-, GND), Integrated lightning protection |
| Device software: | Multilingual web interface in the national languages DE, EN, ES, FR, IT, NL, Online query of the connected sensors and operating states, Large display of pool water temperature, solar temperature and, if connected, the solar absorber output temperature (return temperature). Graphical representation of temperatures over time, Time control for multiple pumps can be individually adjusted, Motor valve operation for electric ball valve in 2-way or 3-way design with optional pump connection, Settings for setpoints, hysteresis and temperature difference for heating and cooling as well as interval and duration for flushing can be adjusted, In heat pump operation, a minimum outside temperature and maximum temperature and hysteresis can be set, Freely selectable DMX colors with 6 presets, Online firmware update option. Email notification of important information and possible faults can be activated. PDF instructions available online |
Manufacturer
SOLAR-RIPP Electric
RIPPultimate GmbH & Co. KG
Auf dem Hohen Rech 3
53498 Bad Breisig
Germany
+49-2633-4269290
legaldepartment@rippultimate.de
Accesories
Temperature sensor for the new SOLAR-RIPP ® WiFi solar controller SRSCWIFI2025 and the models SRCPOOLMINI, SRCPOOLML000, SRCPOOLML00P, SRCPOOLMLFPR and SRCPOOLMLFPP; universal temperature sensor of the latest series with 6.5mm outer diameter; can be used equally as a solar sensor and pool water sensor; as a solar sensor, simply attach it to the outside, facing the sun, on the SOLAR-RIPP ® solar absorber manifold outlet with a cable tie, please do not forget the lightning protection element when installing; as a pool water sensor, insert it into the cold water sensor installation adapter PVC50 using thermal paste; price for 1 piece. The short 15cm sensors for extension are made of a black PVC cable and are temperature-resistant from -50° to +105°C. The sensors from 5m in length comply with IP67, have a waterproof cast sleeve made of stainless steel and are provided with a red silicone cable and are therefore temperature resistant between -50° and +200°C. Please select the required sensor length!
50mm installation adapter made of PVC-U for mounting a SOLAR-RIPP ® temperature sensor with 6mm diameter as a cold water sensor for measuring the pool water sucked in by the swimming pool pump, corrosion-free, the use of the optionally available thermal paste to increase contact is recommended, simply glue into a T-fitting with 50mm PVC-U inner diameter.
PVC-U T-piece 90 degrees with triple adhesive sockets 50mm inner diameter, black
PE-HD connection set for incorporating the cold water sensor installation adapter made of PVC-U into a 50mm HD-PE pipe, please install in front of the pump (suction side) in order to measure the pool water temperature as accurately as possible, black/grey, illustration for example.
PVC-U T-piece 90-degree with triple adhesive sockets 63mm inner diameter, grey
Relay - in protective housing - is to be used wherever potential-free switching is required instead of the 230VAC output of the controller or where the switching capacity of the controller (solar controller) is not sufficient.
Motorized Valves
Optional inserts for PE-HD for welding available as accessories! This article is available as standard with DN40/d50 and DN50/d63 in a two-way and three-way version. The three-way version is available in three (3) different hydraulic connection variants. Other dimensions (diameters) are also available on request.
Optional inserts for PE-HD for welding available as accessories! This article is available as standard with DN40/d50 and DN50/d63 in a two-way and three-way version. The three-way version is available in three (3) different hydraulic connection variants. Other dimensions (diameters) are also available on request.
Optional inserts for PE-HD for welding available as accessories! This article is available as standard with DN40/d50 and DN50/d63 in a two-way and three-way version. The three-way version is available in three (3) different hydraulic connection variants. Other dimensions (diameters) are also available on request.
Optional inserts for PE-HD for welding available as accessories! This article is available as standard with DN40/d50 and DN50/d63 in a two-way and three-way version. The three-way version is available in three (3) different hydraulic connection variants. Other dimensions (diameters) are also available on request.
