Electric 3-way ball valve for 3 positions – please select a variant...
€464.09
Product information "Electric 3-way ball valve for 3 positions – please select a variant..."
Motor top housing color "red" (image for illustration purposes only)
| Ball design: | X3-ball |
|---|---|
| Electrically driven motor ball valve: | Internal housing heating to prevent internal condensation, Low current consumption of max. 2 amps at max. torque, Low power consumption between 31 and 46 watts, Manual emergency operation via large handwheel (first set the side switch lever to "manual"), Multi-voltage capable; works with 24 to 240 volts alternating current (VAC) at 50 to 60 Hz and with 24 to 135 volts direct current (VDC), Operating status display via multi-colored LED light, Switching time approx. 9 seconds (for 90-degree rotation), The ball valve moves between three rotational positions: 0 degrees, 90 degrees, and 180 degrees, Visual position indicator (0°, 90°, 180°) for valve position, Working temperature between -20°C and +70°C |
| Pipeline series: | Series Corrugated hose 38, Series PE-HD 50, Series PE-HD 63, Series PVC-U 50, Series PVC-U 63 |
| Pressure level (nominal pressure): | 16 bar |
| Product Type: | electrical component actuated valve |
| diameter (inside, outside): | 63, -/- |
| connection type: | thread/ screw connection, butt welding, Adhesive (PVC-U), electric |
| colour: | multicolored |
| uv resistance: | medium |
| guarantee: | Legal |
Accessories 50mm actuated 2 way valve
Kit for converting the motorized valve. This kit gives the motorized valve the ability to operate independently using a battery, even in the event of a power failure. Whether the motorized valve changes its position to 0° or 90° in the event of a power failure can be set using a jumper on the circuit board. The conversion kit includes: Circuit board Battery (2200 mAH, charging current 40 mA, 100% full charge in just 28 hours) Lower battery holder Upper battery holder 3 fine-thread screws 2 screws (for plastic)
