3 Way Actuated Valve 50mm PVC (T1 ball)
€399.98
delivery time: 3-6 days
Description
| Ball design: | T-ball |
|---|---|
| Electrically driven motor ball valve: | Ball valve moves between two rotation positions, 0 degrees and 90 degrees, Internal housing heating to prevent internal condensation, Low current consumption of max. 2 amps at max. torque, Low power consumption between 31 and 46 watts, Manual emergency operation via large handwheel (first set the side switch lever to "manual"), Multi-voltage capable; works with 24 to 240 volts alternating current (VAC) at 50 to 60 Hz and with 24 to 135 volts direct current (VDC), Operating status display via multi-colored LED light, Switching time approx. 9 seconds (for 90-degree rotation), Visual position indicator (0 degrees, 90 degrees) for valve position, Working temperature between -20°C and +70°C |
| Pipeline series: | Series Corrugated hose 38, Series PE-HD 50, Series PVC-U 50 |
| Pressure level (nominal pressure): | 16 bar |
| Product Type: | electrical component actuated valve |
| Solar controller accessories: | actuated valve |
| diameter (inside, outside): | 50, -/- |
| connection type: | thread/ screw connection, butt welding, Adhesive (PVC-U), electric |
| colour: | multicolored |
| uv resistance: | medium |
| guarantee: | Legal |
Manufacturer
SOLAR-RIPP Electric
RIPPultimate GmbH & Co. KG
Auf dem Hohen Rech 3
53498 Bad Breisig
Germany
+49-2633-4269290
legaldepartment@rippultimate.de
Accessories 50mm actuated 2 way valve
Kit for converting the motorized valve. This kit gives the motorized valve the ability to operate independently using a battery, even in the event of a power failure. Whether the motorized valve changes its position to 0° or 90° in the event of a power failure can be set using a jumper on the circuit board. The conversion kit includes: Circuit board Battery (2200 mAH, charging current 40 mA, 100% full charge in just 28 hours) Lower battery holder Upper battery holder 3 fine-thread screws 2 screws (for plastic)
browser demo viewNew in version 2026: with adjustable priority switching of the solar system over the heat pump and photovoltaic smart meter support.
Protective contact power cable according to DIN49441, 250VAC, 16A, 1.5mm2, black, 5m long with attached Schuko angle plug, we recommend ordering 2 pieces at once, one cable for connecting the socket to the solar controller, the second cable for connecting the solar controller to the pump or motor valve (the plug is then not required and can be cut off).
